Questions? Call us: +1 760-918-6722

DT028-PTS hardware questions

I have several questions on the DT028-PTS capacitive touch panel.
1) Can you verify that the RESET signal (pin 4) is active-low?
2) Can you verify that the INT signal (pin 5) is active-low? Also, is the INT output open collector or standard (driven high and driven low)? In other words, do I need to pull the INT signal up with a resistor. From the FT5346 data sheet it looks like the pin can be configured either way.

Thanks in advance!

Replies

engineering_seacomp's picture
engineering_seacomp
April 16, 2019

Hi,

 

Both the RESET & INT pins are active Low. The INT pin is does not require a pull-up resistor. 

Let us know if you have any other questions.

Thanks