Questions? Call us: +1 760-918-6722

64128MX-RGB Graphic LCD Module

128x64 Graphic LCD Display with RGB Backlight

Display Resolution 128 x 64
Viewing Angle 6 o'clock or 12 o'clock
Display Connector FPC
LCD Driver IC Sitronix ST7565R
Module Size (w x h x d) 77.4 x 52.4 x 10.5 mm
View Area (w x h) 70 x 40 mm
Pixel Size 0.48 x 0.48 mm
Driving Method 1/65 Duty, 1/9 Bias
Operating Temperature Wide (-20 ~ 70°C)
Backlight Supply Voltage 3.2V
Backlight Current 80 mA
transflective LCD Graphic Display Module 128X64 FSTN With FPC Interface and Red Green Blue LED backlight

Our 64128MX monochrome graphic LCD module has a viewing area of 70 x 40 mm. This LCD is widely used in industries such as home automation and test and measurement equipment. The COG IC is the Sitronix ST7565R. This LCD has a FPC interface.

The ST7565R is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or 4-line SPI display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7565R contain 65x132 bits of display data RAM and there is a 1-to-1 correspondence between the LCD panel pixels and the internal RAM bits, these chips enable displays with a high degree of freedom. The ST7565R chips contain 65 common output circuits and 132 segment output circuits, so that a single chip can drive a 65x132 dot display (capable of displaying 8 columns x 4 rows of a 16x16 dot kanji font).

Get a Quote for 64128MX-RGB

Check the box if you are not a bot.