Questions? Call us: +1 760-918-6722

64128M-RGB Graphic LCD Module

128x64 Graphic LCD Display with RGB Backlight

Display Resolution 128 x 64
Viewing Angle 6 o'clock or 12 o'clock
Display Connector 28-Pin
LCD Driver IC Sitronix ST7565R
Module Size (w x h x d) 77.4 x 52.4 x 10.5 mm
View Area (w x h) 70 x 40 mm
Pixel Size 0.48 x 0.48 mm
Driving Method 1/65 Duty, 1/9 Bias
Operating Temperature Wide (-20 ~ 70°C)
Backlight Supply Voltage 3.2V
Backlight Current 80 mA
monochrome graphic LCD module 128x64 RGB FSTN display with thru-hole pin interface

Our 64128M monochrome graphic LCD module has a viewing area of 70 x 40 mm and is the largest of our standard 128 x 64 LCD displays. This LCD is widely used in industries such as home automation and test and measurement equipment.  The COG IC is the Sitronix ST7565R. This LCD has a THRU-HOLE PIN interface.

The ST7565R is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or 4-line SPI display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7565R contain 65x132 bits of display data RAM and there is a 1-to-1 correspondence between the LCD panel pixels and the internal RAM bits, these chips enable displays with a high degree of freedom. The ST7565R chips contain 65 common output circuits and 132 segment output circuits, so that a single chip can drive a 65x132 dot display (capable of displaying 8 columns x 4 rows of a 16x16 dot kanji font).

Get a Quote for 64128M-RGB

Check the box if you are not a bot.