Efficient 2.8" Color TFT LCD Display

2.8" TFT LCD Display with Resistive Touchscreen

The DT028BTFT series is the latest revision for the 2.8" TFT LCD. The improvement in this version is an increased efficiency due to new LEDs within the backlight. This efficient 2.8 inch TFT LCD has a 240 x 320 resolution and is available as non-touch (DT028BTFT) or with optional resistive touch display (DT028BTFT-TS). The TFT uses the Ilitek ILI9341 single-chip driver to drive the display.

The 2.8” TFT LCD is best interfaced either in 8-bit or 16-bit mode via MCU parallel or RGB interfaces. The display can also be interfaced via a 3-wire (non-touch) or 4-wire (resistive touch screen) serial peripheral interface (SPI). However, this is not recommended as it tends to have slower speeds than MCU / RGB interfaces. View data sheets and other resources for the DT028BTFT and DT028BTFT-TS below.

Technical Information

TFT Module
Diagonal Size2.8 in
Resolution240 (RGB) x 320
Module Size50 mm (W) x 69.2 mm
Active Area43.2 mm x 57.6 mm
Pixel Size0.18 mm x 0.18 mm
Viewing Direction6 o'clock
Interface TypeRGB / MCU

Get a Quote for DT028BTFT